Módulos de desaireación atmosféricos

Módulo para cervecerías destinado a la desaireación del agua a temperatura ambiente. La gama Aldox™ de Alfa Laval, compuesta por módulos de desaireación autónomos y premontados, ofrece desaireación de agua caliente o fría con niveles de oxígeno disuelto (OD) inferiores a 10 ppb y una eficiencia de eliminación de dióxido de carbono superior al 95 % para cualquier capacidad comprendida entre 10 y 1800 hl/h.

环境脱气模块

Agua sin oxígeno de primera calidad para los procesos de elaboración de cerveza

  • Control automático y conexión inmediata para reducir al mínimo los trabajos in situ
  • Diseño higiénico y compacto que requiere poco mantenimiento
  • Funcionamiento estable y fiable a presión atmosférica: no se necesitan recipientes a presión ni bombas de vacío
  • Nivel de oxígeno disuelto inferior a 10 ppb
  • Pérdidas de gas de desgasificación inferiores al 5 %

La solución completa para la desaireación y la preparación del mosto: Aldox™ es un módulo totalmente automático, autónomo, premontado y probado en fábrica para la preparación del mosto y la desaireación del agua. Su funcionalidad «plug-and-play» garantiza un mínimo de trabajo in situ y Aldox™ se puede suministrar con una gama de opciones complementarias. Consiga hasta un 95 % de recuperación de energía si se incluye la pasteurización del agua. En cumplimiento de la normativa de la industria alimentaria y cervecera, todos los componentes en contacto con el producto están fabricados en acero inoxidable con juntas resistentes al calor y diseñados para un CIP eficiente mediante un programa CIP integrado.

.

Clientes satisfechos

.

FAQs

How much CO2 will remain in the deaerated water (DAW)?

The Alfa Laval Aldox water deaeration module works at atmospheric pressure. The CO2 content in the deaerated water will correspond to the levels found at the water temperature at atmospheric pressure. At 20°C, for instance, the CO2 concentration is approximately 1.75g/l.

 

What is the startup time?

The Alfa Laval Aldox Mini takes less than five minutes to be able to supply a continuous stream of deaerated water. 

 

Do I need a deaerated water tank after the Alfa Laval Aldox Mini?

In some small breweries, it is not strictly necessary to have a deaerated water tank and routing system after the Aldox Mini. The connection to the line to be flushed can be positioned prior to the Aldox Mini. If a pressure above 2 bar (g) and higher flow rates are needed, a deaerated water tank and routing are required.

If no buffer tank is used, the Aldox goes either into circulation mode or into stand-by mode depending on the operating circumstances. When deaerated water is required again, the Aldox switches back into production mode. However, Alfa Laval recommends the use of a buffer tank if DAW needs are constant during the day and at different points in the brewery or if DAW requirements lasting several hours or more are common. During production stops, the Aldox will consume CO2 or N2 while in stand-by mode, making the use of a buffer tank more cost-effective in the long term.

 

How often do I need to conduct Cleaning-in-Place (CIP)?

The required cleaning frequency depends on the water quality and its impurities. However, a typical cleaning routine generally calls for CIP with a caustic cleaning agent about once or twice a month, followed by acid cleaning once every three months. You can view our webinar about CIP. 

 

To reduce the amount of oxygen in the deaerated water produced by the Aldox, can I simply supply more CO2 into the Aldox?

No. The amount of oxygen in the deaerated water produced by the Aldox depends on the height of the column filled with packing material, not the CO2 supplied into the process.

 

Does the higher ambient temperature of the feed water affect the efficiency?

The higher the temperature, the lower the gas consumption since less CO2 will be dissolved into the water. The higher the temperature, the better the stripping efficiency.

 

What the typical commissioning time for an Aldox Mini? (A conventional Aldox will take longer.)

Commissioning generally takes about two days onsite and, given the fact that the Aldox Mini is such a simple system, it can be handled by the brewery.

.